Difference between revisions of "Steelwork specification"
| (39 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
__SECTIONLINKTOTOP__ | __SECTIONLINKTOTOP__ | ||
| − | The purpose of a structural steelwork specification is to state what materials and products should be used and how work ([[Fabrication|fabrication]] and [[Construction#Steel erection|erection]]) should be carried out, in order to ensure that the completed structure meets the designer's assumptions and the client's needs. [[Design codes and standards|Design standards]], such as the [[Design codes and standards#Introduction to Eurocodes|Eurocodes]], give design rules that are valid only if strength, dimensional accuracy and freedom from defects are within presumed limits. The performance of a structure required by [[Design_codes_and_standards#Building_Regulations|regulations]] will also only be achieved when [[Construction|construction]] is within presumed limits. | + | The purpose of a structural steelwork specification is to state what materials and products should be used and how work ([[Fabrication|fabrication]] and [[Construction#Steel erection|erection]]) should be carried out, in order to ensure that the completed structure meets the designer's assumptions and the client's needs. [[Design codes and standards|Design standards]], such as the [[Design codes and standards#Introduction to Eurocodes|Eurocodes]], give design rules that are valid only if strength, ductility, dimensional accuracy and freedom from defects are within presumed limits. The performance of a structure required by [[Design_codes_and_standards#Building_Regulations|regulations]] will also only be achieved when [[Construction|construction]] is within presumed limits. |
The complete 'execution specification' for a structure comprises a range of contractual documents, including drawings, a general specification with technical requirements for supply of materials and products and for workmanship, and project-specific requirements for the individual structure. | The complete 'execution specification' for a structure comprises a range of contractual documents, including drawings, a general specification with technical requirements for supply of materials and products and for workmanship, and project-specific requirements for the individual structure. | ||
| − | {{#image_template:image=File:NSSS- | + | {{#image_template:image=File:NSSS-7.jpg|align=right|width=300|wrap=true|caption=[[#Resources|NSSS (7th Edition)]]}} |
| − | == | + | ==British standards for steelwork (issued as BS EN)== |
| − | {{#image_template:image=File:British_Steel_DOP.jpg|align=right|width=600|wrap=true|caption=Declaration of | + | {{#image_template:image=File:British_Steel_DOP.jpg|align=right|width=600|wrap=true|caption=UK Declaration of Performance certificate for a [[Steel_material_properties|Grade S355]] hot rolled [[Steel_construction_products#Long_products_-_open_sections|structural steel section]]}} |
| − | Rules for the design of steelwork are given in Eurocode 3<ref name="BSEN1993">BS EN 1993 Eurocode 3: Design of steel structures. Various parts, BSI</ref> Design of steel structures. Within Part 1-1<ref name="BSEN1993-1-1">BS EN 1993-1-1:2005+A1:2014, Eurocode 3: Design of steel structures. General rules and rules for buildings, BSI</ref> | + | Rules for the design of steelwork are given in Eurocode 3<ref name="BSEN1993">BS EN 1993 Eurocode 3: Design of steel structures. Various parts, BSI</ref> Design of steel structures. Within Part 1-1 of that Eurocode (BS EN 1993-1-1<ref name="BSEN1993-1-1">BS EN 1993-1-1:2005+A1:2014, Eurocode 3: Design of steel structures. General rules and rules for buildings, BSI</ref>), the following basis assumption is stated: "[[Fabrication|fabrication]] and [[Construction#Steel erection|erection]] complies with BS EN 1090". |
BS EN 1090 ''Execution of steel structures and aluminium structures'' consists of four parts: | BS EN 1090 ''Execution of steel structures and aluminium structures'' consists of four parts: | ||
| Line 15: | Line 15: | ||
*Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications | *Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications | ||
<br> | <br> | ||
| − | Conformity with the requirements in Part 1<ref name="BSEN1090-1"></ref> (which are general statements, referring to the other Parts for detailed technical requirements), when formally declared, permits [[ | + | Conformity with the requirements in Part 1<ref name="BSEN1090-1"></ref> (which are general statements, referring to the other Parts for detailed technical requirements), when formally declared, permits [[UKCA marking]] of the structure. |
| − | The technical requirements in Part 2<ref name="BSEN1090-2"></ref> are comprehensive, covering all types of structural steel (including stainless steel) and types of structure (buildings, [[Bridges|bridges]], masts, cranes, etc.). It includes references to European standards for [[Steel construction products|products]], [[Welding|welding]], testing and [[Corrosion protection|corrosion protection]]. Products manufactured in accordance with | + | The technical requirements in Part 2<ref name="BSEN1090-2"></ref> are comprehensive, covering all types of structural steel (including stainless steel) and types of structure (buildings, [[Bridges|bridges]], masts, cranes, etc.). It includes references to European standards (adopted as British standards and issues as BS EN) for [[Steel construction products|products]], [[Welding|welding]], testing and [[Corrosion protection|corrosion protection]]. Products manufactured in accordance with UK designated standards are individually [[UKCA marking|UKCA marked]].<!--<br clear=right>--> |
| − | All manufacturers of products covered by [[ | + | All manufacturers of products covered by [[UKCA_marking]] must have a Certified Factory Production Control system in place to the relevant UK designated standard and have been given approval by a UK Approved Body to apply the UKCA mark. |
| − | Manufacturers must also make available a Declaration of Performance (DoP) when a [[ | + | Manufacturers must also make available a UK Declaration of Performance (DoP) when a [[UKCA_marking|UKCA marked]] product is placed on the market. The UK DoP serves to deliver the information about the essential characteristics of the product that the manufacturer wants to make available. The manufacturer, by drawing up a UK DoP, assumes the responsibility for the conformity of the construction product with the declared performance. |
| − | + | UK DoPs for [[Steel_construction_products#Long_products_-_open_sections|hot rolled structural steel sections]] from British Steel are available [https://britishsteel.co.uk/who-we-are/approvals-certifications/declarations-of-performance/ here] and a UK DoP for fabricated steelwork can be found [[UKCA_marking#What_to_check_.E2.80.93_UK_Declaration_of_Performance|here]]. | |
==Project-specific requirements== | ==Project-specific requirements== | ||
| − | Because BS EN 1090-2<ref name="BSEN1090-2"> | + | Because BS EN 1090-2<ref name="BSEN1090-2"></ref> is a comprehensive document, for all steel products and types of structure, it includes numerous instances where options need to be selected or alternatives specified. A summary list of all the options and alternatives is included in an Annex to that Part: many of them are not relevant for ordinary building structures. |
| − | It is therefore necessary to draw up a set of project-specific requirements that supplement BS EN 1090-2<ref name="BSEN1090-2"></ref>. For bridge structures in the UK, the Specification for Highway Works<ref name="SHW1800">[ | + | It is therefore necessary to draw up a set of project-specific requirements that supplement BS EN 1090-2<ref name="BSEN1090-2"></ref>. For bridge structures in the UK, the Specification for Highway Works<ref name="SHW1800">[https://www.standardsforhighways.co.uk/tses/attachments/ac039ec2-c760-4d1a-9e12-31c075eb8dec?inline=true Manual of Contract Documents for Highway Works (MCHW). Volume 1: Specification for Highway Works. Series 1800 Structural Steelwork. April 2021, TSO]</ref>, or Network Rail's Specification for structural steelwork<ref name="NR1800">NR/L2/CIV/140/1800C Specification for structural steelwork, Network Rail, June 2016,</ref> (which is very similar), will be suitable for most highway and railway bridge projects respectively. For building structures the National Structural Steelwork Specification for Building Construction ([[#The National Structural Steelwork Specification for Building Construction|NSSS]]) serves a similar purpose. The [[#The National Structural Steelwork Specification for Building Construction|NSSS]] is discussed further below. |
Even when the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] is used for building structures, some project-specific requirements will still be needed and the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] defines the "project specification" as comprising the [[#The National Structural Steelwork Specification for Building Construction|NSSS]], with qualification where necessary, together with Part 1<ref name="BSEN1090-1"></ref> and Part 2<ref name="BSEN1090-2"></ref> of BS EN 1090. | Even when the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] is used for building structures, some project-specific requirements will still be needed and the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] defines the "project specification" as comprising the [[#The National Structural Steelwork Specification for Building Construction|NSSS]], with qualification where necessary, together with Part 1<ref name="BSEN1090-1"></ref> and Part 2<ref name="BSEN1090-2"></ref> of BS EN 1090. | ||
| Line 35: | Line 35: | ||
Considerable effort over many years has been spent by the industry in developing the [[#Resources|National Structural Steelwork Specification for Building Construction (NSSS)]]. The [[#Resources|NSSS]] is primarily a [[Construction|construction]] (or execution) specification but also acknowledges the common contractual situations where the steelwork contractor designs the [[Simple connections|connections]] (and in some cases the members as well) - it includes checklists of information that the contractor needs to carry out design, | Considerable effort over many years has been spent by the industry in developing the [[#Resources|National Structural Steelwork Specification for Building Construction (NSSS)]]. The [[#Resources|NSSS]] is primarily a [[Construction|construction]] (or execution) specification but also acknowledges the common contractual situations where the steelwork contractor designs the [[Simple connections|connections]] (and in some cases the members as well) - it includes checklists of information that the contractor needs to carry out design, | ||
| − | The [[#Resources|NSSS]] was originally developed for use with structures designed in accordance with BS 5950-1<ref name="BS5950-1">BS 5950-1:1990 Structural use of steelwork in building. Code of practice for design in simple and continuous construction: hot rolled sections. BSI (Withdrawn)</ref> but the 5th Edition covered structures designed in accordance with either BS 5950-1<ref name="BS5950-1"></ref> or Eurocode 3<ref name="BSEN1993"></ref>. | + | The [[#Resources|NSSS]] was originally developed for use with structures designed in accordance with BS 5950-1<ref name="BS5950-1">BS 5950-1:1990 Structural use of steelwork in building. Code of practice for design in simple and continuous construction: hot rolled sections. BSI (Withdrawn)</ref> but the 5th Edition covered structures designed in accordance with either BS 5950-1<ref name="BS5950-1"></ref> or Eurocode 3<ref name="BSEN1993"></ref>. From July 2014 onwards, all construction products had to be [[CE marking|CE marked]] and from that date, the 5th Edition was available <u>only</u> in a [[CE marking|CE marked]] version for use with structures to be executed in accordance with BS EN 1090-2<ref name="BSEN1090-2"></ref>. The 6th Edition, published in 2017, similarly covered structures designed in accordance with either BS 5950-1<ref name="BS5950-1"></ref> or Eurocode 3<ref name="BSEN1993"></ref> and executed in accordance with BS EN 1090-2<ref name="BSEN1090-2"></ref>, as does the current 7th Edition which was published in 2020 and came into force on 1st January 2021. The main changes between the 6th Edition and the 7th Edition are briefly described [[#Main changes in the NSSS (7th Edition)|in the following section]]. |
The principal topics covered in the [[#Resources|NSSS]] are as follows: | The principal topics covered in the [[#Resources|NSSS]] are as follows: | ||
| Line 48: | Line 48: | ||
*[[Construction#Steel erection|Erection]] | *[[Construction#Steel erection|Erection]] | ||
*[[Construction#Tolerances|Erection accuracy]] | *[[Construction#Tolerances|Erection accuracy]] | ||
| − | *[[Corrosion protection| | + | *Protective treatment ([[Corrosion protection|corrosion]] and [[Fire_protecting_structural_steelwork#Intumescent Coatings|fire]]) |
*Quality management | *Quality management | ||
<br> | <br> | ||
| − | These topics present, in a more concise manner, the requirements in BS EN 1090-2<ref name="BSEN1090-2"></ref> for orthodox building structures. The requirements given in the [[#Resources|NSSS]] should not conflict with those in BS EN 1090-2<ref name="BSEN1090-2"></ref> but should there be conflict, the [[#Resources|NSSS]] takes precedence as it is likely to be more onerous. | + | These topics present, in a more concise manner, the requirements in BS EN 1090-2<ref name="BSEN1090-2"></ref> for orthodox building structures. The requirements given in the [[#Resources|NSSS]] should not conflict with those in BS EN 1090-2<ref name="BSEN1090-2"></ref>, but should there be conflict, the [[#Resources|NSSS]] takes precedence as it is likely to be more onerous. |
Provision is included for modifications to suit any unorthodox construction. | Provision is included for modifications to suit any unorthodox construction. | ||
| Line 57: | Line 57: | ||
The National Structural Steelwork Specification clarifies and aids the process of translating designer's requirements into specific work instructions for execution. Specifiers are encouraged to use the [[#Resources|NSSS]] as the default specification for all steel building structures. | The National Structural Steelwork Specification clarifies and aids the process of translating designer's requirements into specific work instructions for execution. Specifiers are encouraged to use the [[#Resources|NSSS]] as the default specification for all steel building structures. | ||
| − | ===Main changes in the [[#Resources|NSSS ( | + | ===Main changes in the [[#Resources|NSSS (7th Edition)]]=== |
| − | + | The 7th edition of the NSSS has been extensively updated and represents the biggest change since its introduction in 1989. The key changes are as follows. | |
| − | + | ||
| − | + | ||
| − | + | The Steelwork Contractor’s [[Welding|welding]] quality management system is now required to be certified to: | |
| − | + | #the standard quality requirements described in BS EN ISO 3834-3<ref name="BSEN3834-3">BS EN ISO 3834-3:2021. Quality requirements for fusion welding of metallic materials. Standard quality requirements. BSI</ref> for Execution Class 2 | |
| − | + | #the comprehensive quality requirements described in BS EN ISO 3834-2<ref name="BSEN3834-2">BS EN ISO 3834-2:2021. Quality requirements for fusion welding of metallic materials. Comprehensive quality requirements. BSI</ref> for Execution Class 3 | |
| − | + | <br> | |
| − | + | The requirements for protective treatment (both corrosion and fire) have been extensively modified and include updated requirements for [[Corrosion_protection|corrosion protection]] systems and new clauses on the specification, application and testing of [[Fire_protecting_structural_steelwork#Intumescent Coatings|intumescent coatings]]. To improve quality, the NSSS encourages the paint systems to be applied in the workshop rather than on-site. | |
| − | + | ||
| − | * | + | The main body of the NSSS is limited to [[UKCA_marking#Select the Execution Class|Execution Class 2]], but this version also contains an Annex of the requirements for Execution Class 3 for static structures and an Annex giving general guidance on Execution Class 3 for buildings subject to [[Fatigue_design_of_bridges#The mechanism of fatigue|fatigue]], such as crane supporting structures. |
| − | * | + | |
| + | ===Annex J - Sustainability Specification=== | ||
| + | {{#image_template:image=File:Sustainability_Specification.jpg|align=right|width=200|wrap=true|caption=[[#Resources|NSSS – Annex J]]}} | ||
| + | The 1<sup>st</sup> edition of the Sustainability Specification for structural steelwork for building [[Construction|construction]] was published by BCSA in January 2022, and is freely available [[#Resources|here]]. Due to come into force on 1<sup>st</sup> June 2022, this document will constitute a new Annex J to the National Structural Steelwork Specification for Building Construction ([[Steelwork_specification#The National Structural Steelwork Specification for Building Construction|NSSS]]) when revised in its 8<sup>th</sup> edition. | ||
| + | |||
| + | Given demands to promote more sustainable construction, and particularly in the context of the climate emergency, this document specifies general requirements and practices for achieving environmentally sustainable steel building construction. It supplements the requirements of Clauses 1 to 11 of the NSSS and includes guidance on both the sustainable [[Design|design]] of structural steelwork and the specification for sustainable [[Fabrication|fabrication]] of structural steelwork. It requires all relevant Environmental Product Declarations (EPDs) to be submitted for new [[Steel_construction_products|steel products]], as well as for [[Corrosion_protection|corrosion]] and [[Fire_protecting_structural_steelwork|fire protection]] systems and cover several topics, including: | ||
| + | *Steel procurement | ||
| + | *Project specification requirements in terms of [[Sustainability|sustainability]] | ||
| + | * [[Recycling_and_reuse#Reuse|Reusing structural steel]] | ||
<br> | <br> | ||
| + | Prepared under the guidance of a steering committee comprised of structural steel suppliers, steelwork contractors, designers, and individual sustainability experts from BCSA, SCI, and IStructE, this Sustainability Specification can be incorporated in the contract documentation separately to the NSSS by specifying the following: | ||
| + | |||
| + | ''Fabrication in accordance with (i) National Structural Steelwork Specification for Building Construction (NSSS), 7<sup>th</sup> edition and (ii) NSSS - Annex J - Sustainability Specification.'' | ||
| + | |||
| + | BCSA also published a [[#Resources|Model specification is for the purchase of reclaimed steel sections]] in March 2022, to be used in conjunction with NSSS Annex J – Sustainability Specification. This model specification applies to the contract between the stockholder (the supplier) and the steelwork contractor (the purchaser) for steel products placed on the market as reclaimed structural steel sections for the [[Fabrication|fabrication]] of structural steelwork. It covers the selection and acceptance criteria for reclaimed steelwork, the technical specification for those steel products including tolerances on dimensions and shape and material performance requirements, product testing and quality management requirements and documentation. | ||
| + | |||
| + | ===NSSS Corrigenda (2023)=== | ||
| + | {{#image_template:image=File:67-23_NSSS_Corrigenda_2023_Cover.jpg|align=right|width=200|wrap=true|caption=[[#Resources|NSSS Corrigenda (2023)]]}} | ||
| + | To ensure that the constructional steelwork industry is ready to meet the new challenges presented by the Building Safety Act 2022<ref name="BSA2022">[https://www.legislation.gov.uk/ukpga/2022/30/contents/enacted Building Safety Act 2022]</ref>, BCSA has revised the 7th edition of the [[#The_National_Structural_Steelwork_Specification_for_Building_Construction|National Structural Steelwork Specification for Building Construction]]. Published on 3<sup>rd</sup> April 2023, it will come into force on 2<sup>nd</sup> October 2023 and is freely available [https://www.bcsa.org.uk/upload/Resources/Fabrication%20Technical%20and%20Design/67-23%20NSSS%20Corrigenda%202023%20-%20Publication.pdf here] | ||
| + | |||
| + | The main change is the introduction of a new assessment scheme for steelwork contractors to demonstrate their competence and capability in the [[Fabrication|fabrication]] of structural steelwork. This new assessment scheme is called the Register of Qualified Steelwork Contractors (Building) and is based on the [https://builduk.org/priorities/increasing-productivity/pre-qualification/ Common Assessment Standard] introduced by [https://builduk.org/ BuildUK]. The scheme also includes specific requirements for steelwork contractors which include details of their [[Fabrication|fabrication]] facility, the skill, knowledge and experience of their staff and [[UKCA_marking|UKCA marking]]. In addition, the scheme requires information on a company’s management and [[Health_and_safety|health and safety]] systems together with their [[Sustainability|sustainability]] and [[Fabrication#Steel Construction Building Information Modelling (BIM) Charter|Building Information Modelling]] credentials. | ||
| + | |||
| + | Other changes to the NSSS include: | ||
| + | |||
| + | *Clarification that the suppliers of structural fasteners shall be certified to National Highways Sector Scheme 3 <ref name="NHSS3">[https://www.lantra.co.uk/media/ci2d10i5/nhss-3-ssd-issue-5-9001_2015-final-to-lantra-february-2023.pdf NHSS 3: National Highways Sector Schemes for Quality Management in Highway Works, 3. The Stocking and Distribution Activities for Mechanical Fasteners, Issue 5 (9001:2015), February 2023]</ref> and comply with the [[#Resources|Model specification for the purchase of structural bolting assemblies and holding down bolts]] | ||
| + | *Clarification of Section 11.2.2 to make it clear the [[Fabrication#UKCA_Marking_and_Factory_Production_Control_.28FPC.29|FPC]] assessment to BS EN 1090-1 <ref name="BSEN1090-1"></ref> shall be carried out every year. | ||
| − | ==Particular requirements addressed within BS EN 1090-2<ref name="BSEN1090-2"></ref> and | + | ==Particular requirements addressed within BS EN 1090-2<ref name="BSEN1090-2"></ref> and NSSS (7th Edition)== |
===Communication of information=== | ===Communication of information=== | ||
| Line 82: | Line 106: | ||
====Information provided by the Steelwork Contractor==== | ====Information provided by the Steelwork Contractor==== | ||
{{#image_template:image=File:C-23-02.jpg|wrap=true|caption=Typical 3-D model of a structure<br>''(Image courtesy of Ramboll UK)''}} | {{#image_template:image=File:C-23-02.jpg|wrap=true|caption=Typical 3-D model of a structure<br>''(Image courtesy of Ramboll UK)''}} | ||
| − | The Steelwork Contractor is required by the | + | The Steelwork Contractor is required by the CDM Regulations<ref name="CDMR">[http://www.legislation.gov.uk/uksi/2015/51/contents/made Construction (Design and Management) Regulations (CDM) 2015]</ref> to provide an [[Health_and_safety#Design-basis_method_of_erection|erection method statement]] and this must be amplified by drawings. The contractor must also provide certain information such as general arrangement drawings, [[Fabrication|fabrication]] drawings and connection calculations. Increasingly, designers and contractors use three dimensional electronic [[Modelling_and_analysis|modelling]] systems; the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] makes provision for the transfer of electronic data. On completion, the steelwork contractor is required to provide, either as paper copy or electronically, copies of general arrangement and [[Fabrication|fabrication]] drawings.<br clear=left> |
===Product standards=== | ===Product standards=== | ||
Generally, all constituent products should be specified to one of the reference standards in BS EN 1090-2<ref name="BSEN1090-2"></ref>. For material properties, dimensions and tolerances, the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] includes references to the commonly used product standards, such as: | Generally, all constituent products should be specified to one of the reference standards in BS EN 1090-2<ref name="BSEN1090-2"></ref>. For material properties, dimensions and tolerances, the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] includes references to the commonly used product standards, such as: | ||
| − | *BS EN 10025-2<ref name="BSEN10025-2">BS EN 10025-2: | + | *BS EN 10025-2<ref name="BSEN10025-2">BS EN 10025-2:2019 Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels. BSI</ref> for [[Steel construction products#Standard open sections|rolled sections]]. |
*BS EN 10210-1<ref name="BSEN10210-1>BS EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements. BSI</ref> for hot finished [[Steel construction products#Structural hollow sections|hollow sections]] | *BS EN 10210-1<ref name="BSEN10210-1>BS EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements. BSI</ref> for hot finished [[Steel construction products#Structural hollow sections|hollow sections]] | ||
*BS EN 10219-1<ref name="BSEN10219-1">BS EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements. BSI</ref> for cold formed hollow sections. | *BS EN 10219-1<ref name="BSEN10219-1">BS EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements. BSI</ref> for cold formed hollow sections. | ||
| Line 139: | Line 163: | ||
*[[Welding|Welding]] must be carried out by a [[Welding#Welder_qualification|welders qualified]] for the particular type of work in accordance with the reference standards. | *[[Welding|Welding]] must be carried out by a [[Welding#Welder_qualification|welders qualified]] for the particular type of work in accordance with the reference standards. | ||
<br> | <br> | ||
| − | Furthermore, the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] requires that the steelwork contractor's system for the management of welding will meet the quality requirements | + | Furthermore, the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] requires that the steelwork contractor's system for the management of welding will meet: |
| + | #the standard quality requirements described in BS EN ISO 3834-3<ref name="BSEN3834-3"></ref> for Execution Class 2 | ||
| + | #the comprehensive quality requirements described in BS EN ISO 3834-2<ref name="BSEN3834-2"></ref> for Execution Class 3 | ||
| + | <br> | ||
| + | All welds must be [[Welding#Inspection_and_testing|inspected]], and a proportion of them should be [[Welding#Inspection_and_testing|tested]] as prescribed in the [[#The National Structural Steelwork Specification for Building Construction|NSSS]]. The adherence to the reference standards should ensure that the [[Welding|welding]] is completed without [[Welding#Weld_quality|defects in the welds]]. | ||
| − | + | It is now mandatory for the welding of shear studs to be performed in accordance with the requirements and procedures of BS EN ISO 14555<ref name="BSEN14555">BS EN ISO 14555:2017 Welding. Arc stud welding of metallic materials. BSI</ref> | |
===Bolting=== | ===Bolting=== | ||
| Line 148: | Line 176: | ||
[[Preloaded bolting|Preloaded bolts]] are selected only when the avoidance of slip in service is necessary. They are more expensive and involve additional cost in fabrication and on site. | [[Preloaded bolting|Preloaded bolts]] are selected only when the avoidance of slip in service is necessary. They are more expensive and involve additional cost in fabrication and on site. | ||
| + | |||
| + | A new clause has been added in the 7th Edition (Clause 11.2.5) that requires that bolting shall be coordinated by a Responsible Bolting Coordinator. | ||
Requirements for installation and tightening of bolts are given in the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] and BS EN 1090-2<ref name="BSEN1090-2"></ref>. | Requirements for installation and tightening of bolts are given in the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] and BS EN 1090-2<ref name="BSEN1090-2"></ref>. | ||
| − | BCSA publishes a | + | BCSA publishes a [[#Resources|Model Specification for the Purchase of Structural Bolting Assemblies and Holding Down Bolts]]. |
===Accuracy of erected steelwork=== | ===Accuracy of erected steelwork=== | ||
| Line 171: | Line 201: | ||
The requirements in the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] and BS EN 1090-2<ref name="BSEN1090-2"></ref> relate only to the application of the coating system, not its performance. | The requirements in the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] and BS EN 1090-2<ref name="BSEN1090-2"></ref> relate only to the application of the coating system, not its performance. | ||
| − | Where [[Fire protecting structural steelwork|fire protection]] is required, compatibility of the protection system with any corrosion protective coating should be ensured. Advice should be sought from the manufacturer of the fire protection system. This is particularly important when using [[Fire_protecting_structural_steelwork#Intumescent_Coatings|intumescent coating]] | + | Where [[Fire protecting structural steelwork|fire protection]] is required, compatibility of the protection system with any corrosion protective coating should be ensured. Advice should be sought from the manufacturer of the fire protection system. This is particularly important when using [[Fire_protecting_structural_steelwork#Intumescent_Coatings|intumescent coating]]. The 7th Edition of the NSSS includes new clauses on the specification, application and testing of intumescent coatings. |
In some situations, [[Weathering steel|weathering steel]] may be specified as an alternative to a coating system. | In some situations, [[Weathering steel|weathering steel]] may be specified as an alternative to a coating system. | ||
==Quality assurance== | ==Quality assurance== | ||
| − | Both the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] and BS EN 1090-1<ref name="BSEN1090-1"></ref> require that a [[Fabrication#Quality management|quality management]] system is operated by the Steelwork Contractor and that a certified factory production control (FPC) is in place. When these requirements are satisfied, the structure may be [[ | + | Both the [[#The National Structural Steelwork Specification for Building Construction|NSSS]] and BS EN 1090-1<ref name="BSEN1090-1"></ref> require that a [[Fabrication#Quality management|quality management]] system is operated by the Steelwork Contractor and that a certified factory production control (FPC) is in place. When these requirements are satisfied, the structure may be [[UKCA marking|UKCA marked]]. |
Quality assurance (QA) is provided when the whole management system supports the production of a sound product, whereas Quality Control (QC) is ensuring the product meets the specified benchmark. Both of these contribute to the satisfactory [[Fabrication#Quality management|quality management]] of steel [[Construction|construction]]. | Quality assurance (QA) is provided when the whole management system supports the production of a sound product, whereas Quality Control (QC) is ensuring the product meets the specified benchmark. Both of these contribute to the satisfactory [[Fabrication#Quality management|quality management]] of steel [[Construction|construction]]. | ||
| Line 183: | Line 213: | ||
==References== | ==References== | ||
| − | <references/> | + | <references responsive="0"/> |
==Resources== | ==Resources== | ||
| − | *[https://www. | + | *[https://bcsa.org.uk/product/nsss-7th-edition-pdf/ National Structural Steelwork Specification (7th Edition), 2020, (Publication No. 62/20), BCSA] |
| + | *[https://www.bcsa.org.uk/upload/Resources/Fabrication%20Technical%20and%20Design/67-23%20NSSS%20Corrigenda%202023%20-%20Publication.pdf Corrigenda - First Revision National Structural Steelwork Specification (7th edition), 2023, (Publication No. 67/23), BCSA] | ||
| + | *[https://bcsa.org.uk/product/commentary-3rd-edition-nsss-7th-edition-book/ Commentary (3rd edition) on the National Structural Steelwork Specification for Building Construction (7th edition), 2022, (Publication No. 66/22), BCSA] | ||
| + | *[[Media:BCSA_65-2022.pdf|National Steelwork Specification for Building Construction, Annex J - Sustainability Specification, Publication No. 65/2022, BCSA, 2022]] | ||
*[[Media:BCSA_35-03.pdf|Steel Buildings, Publication No. 35/03, BCSA, 2003, Chapter 15]] | *[[Media:BCSA_35-03.pdf|Steel Buildings, Publication No. 35/03, BCSA, 2003, Chapter 15]] | ||
*[[Media:ED007-D07.pdf|SCI ED007 Selection of steel sub-grade in accordance with the Eurocodes, 2012]] | *[[Media:ED007-D07.pdf|SCI ED007 Selection of steel sub-grade in accordance with the Eurocodes, 2012]] | ||
| Line 192: | Line 225: | ||
*[[Media:SCI_P185.pdf|Hendy, C.R.; Iles, D.C. (2015) Steel Bridge Group: Guidance Notes on best practice in steel bridge construction (6th Issue). (P185). SCI]] | *[[Media:SCI_P185.pdf|Hendy, C.R.; Iles, D.C. (2015) Steel Bridge Group: Guidance Notes on best practice in steel bridge construction (6th Issue). (P185). SCI]] | ||
**[[Media:GN_3-01.pdf|Guidance Note 3.01, Structural steels]] | **[[Media:GN_3-01.pdf|Guidance Note 3.01, Structural steels]] | ||
| − | *[[Media:BCSA_MS-Bolts.pdf|Model Specification for the Purchase of Structural Bolting Assemblies and Holding Down Bolts | + | *[[Media:BCSA_MS-Bolts.pdf|Model Specification for the Purchase of Structural Bolting Assemblies and Holding Down Bolts, Issue 14, BCSA, 2023]] |
| − | |||
*[[Media:BCSA_MS-Tension_Assemblies.pdf|Model Specification for the Purchase of Structural Tension Assemblies, BCSA, 2015]] | *[[Media:BCSA_MS-Tension_Assemblies.pdf|Model Specification for the Purchase of Structural Tension Assemblies, BCSA, 2015]] | ||
| + | *[[Media:BCSA_MS-Reclaimed_Sections.pdf|Model Specification for the Purchase of Reclaimed Steel Sections, BCSA, 2022]] | ||
==See also== | ==See also== | ||
*[[Fabrication|Fabrication]] | *[[Fabrication|Fabrication]] | ||
*[[Construction|Construction]] | *[[Construction|Construction]] | ||
| − | *[[ | + | *[[UKCA marking]] |
*[[Design codes and standards|Design codes and standards]] | *[[Design codes and standards|Design codes and standards]] | ||
*[[Simple_connections|Simple connections]] | *[[Simple_connections|Simple connections]] | ||
Latest revision as of 08:38, 14 September 2023
The purpose of a structural steelwork specification is to state what materials and products should be used and how work (fabrication and erection) should be carried out, in order to ensure that the completed structure meets the designer's assumptions and the client's needs. Design standards, such as the Eurocodes, give design rules that are valid only if strength, ductility, dimensional accuracy and freedom from defects are within presumed limits. The performance of a structure required by regulations will also only be achieved when construction is within presumed limits.
The complete 'execution specification' for a structure comprises a range of contractual documents, including drawings, a general specification with technical requirements for supply of materials and products and for workmanship, and project-specific requirements for the individual structure.
[top]British standards for steelwork (issued as BS EN)
Rules for the design of steelwork are given in Eurocode 3[1] Design of steel structures. Within Part 1-1 of that Eurocode (BS EN 1993-1-1[2]), the following basis assumption is stated: "fabrication and erection complies with BS EN 1090".
BS EN 1090 Execution of steel structures and aluminium structures consists of four parts:
- Part 1: Requirements for conformity assessment of structural components[3]
- Part 2: Technical requirements for steel structures[4]
- Part 3: Technical requirements for aluminium structures.
- Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications
Conformity with the requirements in Part 1[3] (which are general statements, referring to the other Parts for detailed technical requirements), when formally declared, permits UKCA marking of the structure.
The technical requirements in Part 2[4] are comprehensive, covering all types of structural steel (including stainless steel) and types of structure (buildings, bridges, masts, cranes, etc.). It includes references to European standards (adopted as British standards and issues as BS EN) for products, welding, testing and corrosion protection. Products manufactured in accordance with UK designated standards are individually UKCA marked.
All manufacturers of products covered by UKCA_marking must have a Certified Factory Production Control system in place to the relevant UK designated standard and have been given approval by a UK Approved Body to apply the UKCA mark.
Manufacturers must also make available a UK Declaration of Performance (DoP) when a UKCA marked product is placed on the market. The UK DoP serves to deliver the information about the essential characteristics of the product that the manufacturer wants to make available. The manufacturer, by drawing up a UK DoP, assumes the responsibility for the conformity of the construction product with the declared performance.
UK DoPs for hot rolled structural steel sections from British Steel are available here and a UK DoP for fabricated steelwork can be found here.
[top]Project-specific requirements
Because BS EN 1090-2[4] is a comprehensive document, for all steel products and types of structure, it includes numerous instances where options need to be selected or alternatives specified. A summary list of all the options and alternatives is included in an Annex to that Part: many of them are not relevant for ordinary building structures.
It is therefore necessary to draw up a set of project-specific requirements that supplement BS EN 1090-2[4]. For bridge structures in the UK, the Specification for Highway Works[5], or Network Rail's Specification for structural steelwork[6] (which is very similar), will be suitable for most highway and railway bridge projects respectively. For building structures the National Structural Steelwork Specification for Building Construction (NSSS) serves a similar purpose. The NSSS is discussed further below.
Even when the NSSS is used for building structures, some project-specific requirements will still be needed and the NSSS defines the "project specification" as comprising the NSSS, with qualification where necessary, together with Part 1[3] and Part 2[4] of BS EN 1090.
[top]The National Structural Steelwork Specification for Building Construction
Considerable effort over many years has been spent by the industry in developing the National Structural Steelwork Specification for Building Construction (NSSS). The NSSS is primarily a construction (or execution) specification but also acknowledges the common contractual situations where the steelwork contractor designs the connections (and in some cases the members as well) - it includes checklists of information that the contractor needs to carry out design,
The NSSS was originally developed for use with structures designed in accordance with BS 5950-1[7] but the 5th Edition covered structures designed in accordance with either BS 5950-1[7] or Eurocode 3[1]. From July 2014 onwards, all construction products had to be CE marked and from that date, the 5th Edition was available only in a CE marked version for use with structures to be executed in accordance with BS EN 1090-2[4]. The 6th Edition, published in 2017, similarly covered structures designed in accordance with either BS 5950-1[7] or Eurocode 3[1] and executed in accordance with BS EN 1090-2[4], as does the current 7th Edition which was published in 2020 and came into force on 1st January 2021. The main changes between the 6th Edition and the 7th Edition are briefly described in the following section.
The principal topics covered in the NSSS are as follows:
- Information required by the Steelwork Contractor
- Materials
- Information provided by the Steelwork Contractor
- Workmanship
- Welding
- Bolting
- Fabrication accuracy
- Erection
- Erection accuracy
- Protective treatment (corrosion and fire)
- Quality management
These topics present, in a more concise manner, the requirements in BS EN 1090-2[4] for orthodox building structures. The requirements given in the NSSS should not conflict with those in BS EN 1090-2[4], but should there be conflict, the NSSS takes precedence as it is likely to be more onerous.
Provision is included for modifications to suit any unorthodox construction.
The National Structural Steelwork Specification clarifies and aids the process of translating designer's requirements into specific work instructions for execution. Specifiers are encouraged to use the NSSS as the default specification for all steel building structures.
[top]Main changes in the NSSS (7th Edition)
The 7th edition of the NSSS has been extensively updated and represents the biggest change since its introduction in 1989. The key changes are as follows.
The Steelwork Contractor’s welding quality management system is now required to be certified to:
- the standard quality requirements described in BS EN ISO 3834-3[8] for Execution Class 2
- the comprehensive quality requirements described in BS EN ISO 3834-2[9] for Execution Class 3
The requirements for protective treatment (both corrosion and fire) have been extensively modified and include updated requirements for corrosion protection systems and new clauses on the specification, application and testing of intumescent coatings. To improve quality, the NSSS encourages the paint systems to be applied in the workshop rather than on-site.
The main body of the NSSS is limited to Execution Class 2, but this version also contains an Annex of the requirements for Execution Class 3 for static structures and an Annex giving general guidance on Execution Class 3 for buildings subject to fatigue, such as crane supporting structures.
[top]Annex J - Sustainability Specification
The 1st edition of the Sustainability Specification for structural steelwork for building construction was published by BCSA in January 2022, and is freely available here. Due to come into force on 1st June 2022, this document will constitute a new Annex J to the National Structural Steelwork Specification for Building Construction (NSSS) when revised in its 8th edition.
Given demands to promote more sustainable construction, and particularly in the context of the climate emergency, this document specifies general requirements and practices for achieving environmentally sustainable steel building construction. It supplements the requirements of Clauses 1 to 11 of the NSSS and includes guidance on both the sustainable design of structural steelwork and the specification for sustainable fabrication of structural steelwork. It requires all relevant Environmental Product Declarations (EPDs) to be submitted for new steel products, as well as for corrosion and fire protection systems and cover several topics, including:
- Steel procurement
- Project specification requirements in terms of sustainability
- Reusing structural steel
Prepared under the guidance of a steering committee comprised of structural steel suppliers, steelwork contractors, designers, and individual sustainability experts from BCSA, SCI, and IStructE, this Sustainability Specification can be incorporated in the contract documentation separately to the NSSS by specifying the following:
Fabrication in accordance with (i) National Structural Steelwork Specification for Building Construction (NSSS), 7th edition and (ii) NSSS - Annex J - Sustainability Specification.
BCSA also published a Model specification is for the purchase of reclaimed steel sections in March 2022, to be used in conjunction with NSSS Annex J – Sustainability Specification. This model specification applies to the contract between the stockholder (the supplier) and the steelwork contractor (the purchaser) for steel products placed on the market as reclaimed structural steel sections for the fabrication of structural steelwork. It covers the selection and acceptance criteria for reclaimed steelwork, the technical specification for those steel products including tolerances on dimensions and shape and material performance requirements, product testing and quality management requirements and documentation.
[top]NSSS Corrigenda (2023)
To ensure that the constructional steelwork industry is ready to meet the new challenges presented by the Building Safety Act 2022[10], BCSA has revised the 7th edition of the National Structural Steelwork Specification for Building Construction. Published on 3rd April 2023, it will come into force on 2nd October 2023 and is freely available here
The main change is the introduction of a new assessment scheme for steelwork contractors to demonstrate their competence and capability in the fabrication of structural steelwork. This new assessment scheme is called the Register of Qualified Steelwork Contractors (Building) and is based on the Common Assessment Standard introduced by BuildUK. The scheme also includes specific requirements for steelwork contractors which include details of their fabrication facility, the skill, knowledge and experience of their staff and UKCA marking. In addition, the scheme requires information on a company’s management and health and safety systems together with their sustainability and Building Information Modelling credentials.
Other changes to the NSSS include:
- Clarification that the suppliers of structural fasteners shall be certified to National Highways Sector Scheme 3 [11] and comply with the Model specification for the purchase of structural bolting assemblies and holding down bolts
- Clarification of Section 11.2.2 to make it clear the FPC assessment to BS EN 1090-1 [3] shall be carried out every year.
[top]Particular requirements addressed within BS EN 1090-2[4] and NSSS (7th Edition)
[top]Communication of information
[top]Information required by the Steelwork Contractor
The NSSS addresses the information a Steelwork Contractor needs in order to progress the project efficiently, both for design and for execution.
Information needed includes that required for designing the connections, any restrictions on fabrication processes and details of the protective treatment required. The checklists provided in the NSSS attempt to identify any special requirements, so that these are identified at the start of the project.
[top]Information provided by the Steelwork Contractor
(Image courtesy of Ramboll UK)
The Steelwork Contractor is required by the CDM Regulations[12] to provide an erection method statement and this must be amplified by drawings. The contractor must also provide certain information such as general arrangement drawings, fabrication drawings and connection calculations. Increasingly, designers and contractors use three dimensional electronic modelling systems; the NSSS makes provision for the transfer of electronic data. On completion, the steelwork contractor is required to provide, either as paper copy or electronically, copies of general arrangement and fabrication drawings.
[top]Product standards
Generally, all constituent products should be specified to one of the reference standards in BS EN 1090-2[4]. For material properties, dimensions and tolerances, the NSSS includes references to the commonly used product standards, such as:
- BS EN 10025-2[13] for rolled sections.
- BS EN 10210-1[14] for hot finished hollow sections
- BS EN 10219-1[15] for cold formed hollow sections.
Material properties for products to these standards are specified by an alpha-numeric code that indicates its strength and toughness. Typical codes are:
| S355J0 | S=structural steel |
| 355 = yield strength (N/mm²) | |
| J0 = toughness of 27 J at 0°C | |
| S355J2H | S=structural steel |
| 355 = yield strength (N/mm²) | |
| J2 = toughness of 27 J at -20°C | |
| H = structural hollow section |
The mechanical properties of strip steel used in construction are given in BS EN 10346[16]. In addition, BS EN 10143[17] is the standard for tolerances on dimensions and shape for continuously hot-dip coated steel sheet and strip used in structural applications. A typical code for purlins is:
| S450GD, with Z275 | S = structural steel |
| 450 = yield strength (N/mm²) | |
| GD = Hot-dip galvanized | |
| Z275 = 275 g/m² of zinc |
For steel members and components, the designer will specify the steel grade (typically S275 or S355) and sub-grade. Guidance on selection of sub-grade (for toughness against brittle fracture) for building steelwork is given in SCI ED007 for buildings where fatigue is a design consideration and SCI publication P419 for buildings where fatigue is not a design consideration.
Further general guidance on steel product standards is given in Guidance Note 3.01.
In buildings, fasteners will usually be non-preloaded bolts, property class 8.8; in some cases preloaded bolts are required. Product standards for fastener assemblies are summarized in the NSSS.
[top]General workmanship
(Image courtesy of Parker Steel)
The majority of building steelwork contractors have access to numerically controlled machines for cutting and drilling, often combined in 'saw and drill lines' and other fabrication processes. Small details such as notching may be carried out manually or with the use of CNC controlled machines.
The accuracy of numerically controlled fabrication is very high - for example a saw is accurate to a fraction of a millimetre for length and 0.2% of the depth of the cut - and the tolerances specified in the NSSS and BS EN 1090-2[4] are easily achievable. Similarly, the requirements for thermally cut edges are met with modern equipment.
All fabricated items are required to be marked with a unique identifier and this is normal practice in fabricating factories. The identifier ensures traceability to inspection and testing documents.
[top]Welding
Welds are generally specified on drawings by symbols in accordance with the relevant standard. Welding is a relatively expensive operation and weld sizes should not be over-specified. Welding is also a specialist activity and should be executed by appropriately qualified, trained and experienced personnel. The NSSS and BS EN 1090-2[4] require that
- Welding must be carried out in accordance with a weld procedure specification, which itself has been based on a weld procedure test, carried out in accordance with the reference standards
- Welding must be carried out by a welders qualified for the particular type of work in accordance with the reference standards.
Furthermore, the NSSS requires that the steelwork contractor's system for the management of welding will meet:
- the standard quality requirements described in BS EN ISO 3834-3[8] for Execution Class 2
- the comprehensive quality requirements described in BS EN ISO 3834-2[9] for Execution Class 3
All welds must be inspected, and a proportion of them should be tested as prescribed in the NSSS. The adherence to the reference standards should ensure that the welding is completed without defects in the welds.
It is now mandatory for the welding of shear studs to be performed in accordance with the requirements and procedures of BS EN ISO 14555[18]
[top]Bolting
(Image courtesy of Tension Control Bolts Ltd.)
The connection designer for building steelwork will often select one particular size of bolt, typically a M20 x 60 fully threaded, non-preloaded property class 8.8 bolt, for economy.
Preloaded bolts are selected only when the avoidance of slip in service is necessary. They are more expensive and involve additional cost in fabrication and on site.
A new clause has been added in the 7th Edition (Clause 11.2.5) that requires that bolting shall be coordinated by a Responsible Bolting Coordinator.
Requirements for installation and tightening of bolts are given in the NSSS and BS EN 1090-2[4].
BCSA publishes a Model Specification for the Purchase of Structural Bolting Assemblies and Holding Down Bolts.
[top]Accuracy of erected steelwork
The erected steelwork must be within certain tolerances on position and straightness so that the steel can be properly assembled on site, that other building components can be properly constructed on and around the steel frame and that the design assumptions are realised.
Permitted deviations (from specified geometry) are given in tabular and diagrammatic form in the NSSS and BS EN 1090-2[4]. These deviations are typically given for fixed points, such as the level where beams connect to columns. The deflections due to loading are not covered by tolerances; if the deflected position is critically important, it is invariably better to make provision for adjustment.
[top]Protective treatment
The specification of cost-effective protective treatments for structural steelwork should be relatively straightforward for most common applications as long as the factors that affect durability are appreciated.
The optimum protection treatment combines good surface preparation with suitable coating materials for a required durability at a minimum cost. Modern practices applied according to the relevant industry standards provide an opportunity to achieve the desired protection requirements for specific structures.
It is important to define the corrosivity of the environment to which the structure will be exposed, so that an appropriate protective system is specified. Structures built in low risk category environments require minimal treatment, while structures exposed to an aggressive environment need to be protected with a durable system that may require maintenance for extended life.
Painting is the principle method of protecting structural steelwork from corrosion. Hot-dip galvanizing is the most common method of applying a metal coating to structural steel.
When specifying protective treatment, designers should to refer to systems rather than particular products. Standard systems for building steelwork are available.
The requirements in the NSSS and BS EN 1090-2[4] relate only to the application of the coating system, not its performance.
Where fire protection is required, compatibility of the protection system with any corrosion protective coating should be ensured. Advice should be sought from the manufacturer of the fire protection system. This is particularly important when using intumescent coating. The 7th Edition of the NSSS includes new clauses on the specification, application and testing of intumescent coatings.
In some situations, weathering steel may be specified as an alternative to a coating system.
[top]Quality assurance
Both the NSSS and BS EN 1090-1[3] require that a quality management system is operated by the Steelwork Contractor and that a certified factory production control (FPC) is in place. When these requirements are satisfied, the structure may be UKCA marked.
Quality assurance (QA) is provided when the whole management system supports the production of a sound product, whereas Quality Control (QC) is ensuring the product meets the specified benchmark. Both of these contribute to the satisfactory quality management of steel construction.
The standards describing quality systems are the BS EN ISO 9000 series, with BS EN ISO 9001[19] giving requirements for quality management systems. As BS EN ISO 9001[19] may be used in any industry, the Steel Construction Certification Scheme (SCCS) has developed a specific series of schedules for steelwork contracting. One of the British Constructional Steelwork Association (BCSA) membership requirements is the provision of the company's certificate of QA registration.
[top]References
- ↑ 1.0 1.1 1.2 BS EN 1993 Eurocode 3: Design of steel structures. Various parts, BSI
- ↑ BS EN 1993-1-1:2005+A1:2014, Eurocode 3: Design of steel structures. General rules and rules for buildings, BSI
- ↑ 3.0 3.1 3.2 3.3 3.4 BS EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures. Requirements for conformity assessment of structural components. BSI
- ↑ 4.00 4.01 4.02 4.03 4.04 4.05 4.06 4.07 4.08 4.09 4.10 4.11 4.12 4.13 4.14 4.15 BS EN 1090-2:2018 Execution of steel structures and aluminium structures Technical requirements for steel structures. BSI
- ↑ Manual of Contract Documents for Highway Works (MCHW). Volume 1: Specification for Highway Works. Series 1800 Structural Steelwork. April 2021, TSO
- ↑ NR/L2/CIV/140/1800C Specification for structural steelwork, Network Rail, June 2016,
- ↑ 7.0 7.1 7.2 BS 5950-1:1990 Structural use of steelwork in building. Code of practice for design in simple and continuous construction: hot rolled sections. BSI (Withdrawn)
- ↑ 8.0 8.1 BS EN ISO 3834-3:2021. Quality requirements for fusion welding of metallic materials. Standard quality requirements. BSI
- ↑ 9.0 9.1 BS EN ISO 3834-2:2021. Quality requirements for fusion welding of metallic materials. Comprehensive quality requirements. BSI
- ↑ Building Safety Act 2022
- ↑ NHSS 3: National Highways Sector Schemes for Quality Management in Highway Works, 3. The Stocking and Distribution Activities for Mechanical Fasteners, Issue 5 (9001:2015), February 2023
- ↑ Construction (Design and Management) Regulations (CDM) 2015
- ↑ BS EN 10025-2:2019 Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels. BSI
- ↑ BS EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements. BSI
- ↑ BS EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements. BSI
- ↑ BS EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions. BSI
- ↑ BS EN 10143: 2006, Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape, BSI
- ↑ BS EN ISO 14555:2017 Welding. Arc stud welding of metallic materials. BSI
- ↑ 19.0 19.1 BS EN ISO 9001:2015 Quality management systems. Requirements. BSI
[top]Resources
- National Structural Steelwork Specification (7th Edition), 2020, (Publication No. 62/20), BCSA
- Corrigenda - First Revision National Structural Steelwork Specification (7th edition), 2023, (Publication No. 67/23), BCSA
- Commentary (3rd edition) on the National Structural Steelwork Specification for Building Construction (7th edition), 2022, (Publication No. 66/22), BCSA
- National Steelwork Specification for Building Construction, Annex J - Sustainability Specification, Publication No. 65/2022, BCSA, 2022
- Steel Buildings, Publication No. 35/03, BCSA, 2003, Chapter 15
- SCI ED007 Selection of steel sub-grade in accordance with the Eurocodes, 2012
- SCI P419 Brittle fracture: Selection of steel sub-grade to BS EN 1993-1-10, 2017
- Hendy, C.R.; Iles, D.C. (2015) Steel Bridge Group: Guidance Notes on best practice in steel bridge construction (6th Issue). (P185). SCI
- Model Specification for the Purchase of Structural Bolting Assemblies and Holding Down Bolts, Issue 14, BCSA, 2023
- Model Specification for the Purchase of Structural Tension Assemblies, BCSA, 2015
- Model Specification for the Purchase of Reclaimed Steel Sections, BCSA, 2022
[top]See also
- Fabrication
- Construction
- UKCA marking
- Design codes and standards
- Simple connections
- Accuracy of steel fabrication
- Steel material properties
- Preloaded bolting
- Corrosion protection
- Surface preparation
- Paint coatings
- Metallic coatings
- Specification of bridge steelwork
- Fire protecting structural steelwork