Steel the safe solution quiz

Please answer the following 10 multiple choice questions, then click 'submit' to check the result. The pass mark for a CPD certificate is 8 out of 10, and you may retake the quiz as many times as you wish, but the questions will vary! Please note that one, two, three or all of the possible answers presented for each question may be right, and to gain a mark for that question all correct answers must be identified.

Good luck

Steel the safe solution

How can frame designers contribute most effectively to ensuring steelwork is erected safely?

By having a dialogue with those responsible for planning and undertaking the work on site
By a comprehensive series of notes on the drawings issued for construction
By designing to keep the weight of each steel member as low as possible
By specifying that steel erectors should never exit the basket of a MEWP at height

What is the commonly used term for a mobile elevating work platform (MEWP)?

Flying carpet
Rubber duck
Cherry picker
Baby boomer

Which of these items are the three important safety objectives that underpin the choice of erection methodology?

Choosing craneage to lift and place the steelwork
Maintaining the stability of the part-erected structure
Reducing the time taken for site operations
Providing safe access to working positions

When erecting a single storey building which is the type of crane that would most generally be used?

Tower crane
Mobile telescopic crane
Crawler crane
Gantry crane

Which are the three main hazards that occur during steel erection?

Moving large heavy components into position
The part-erected structure can be unstable
Erection is done on sites that are difficult to reach
Each project is different

How does BCSA provide information on the competence of its member companies?

In terms of categories of steelwork
In terms of the recommended maximum size of contracts to be resourced
In terms of the identities of each company’s directors
In terms of numbers of HSE prosecutions

When should steel erectors be allowed to climb on to the steelwork?

Never
Any time that an experienced erector decides
Only after a suitable method has been established in advance
Only whilst two safety lanyards are both attached, one to a MEWP and one to the steelwork

Which three of these steps available to the designer can contribute towards making steel the safe solution?

Use of computers to model the erection sequence
Use of Eurocodes
Use of connection types that are standard wherever possible
Use of off-site prefabrication as far as practicable

Which two of these steps available during execution can most contribute towards making steel the safe solution?

Use of trial erection
Use of new cranes
Use of scaffolding
Use of the part-erected steelwork to gain access to subsequent working positions

BCSA’s assessment of its member companies meets SSIP requirements, what does SSIP stand for?

Safety Schemes in Procurement
Steelwork Safety is Promotion
Safe Steel in Practice
Single Source in Procurement