Sustainability and steel construction quiz

Please answer the following 10 multiple choice questions, then click 'submit' to check the result. The pass mark for a CPD certificate is 8 out of 10, and you may retake the quiz as many times as you wish, but the questions will vary! Please note that one, two, three or all of the possible answers presented for each question may be right, and to gain a mark for that question all correct answers must be identified.

Good luck

Sustainability and steel construction

Of these following common construction materials, which has the best end-of-life recycling credentials?

Concrete
Steel
Timber
They are all the same

New, non-domestic buildings in the UK will need to be ‘zero carbon’ in operation by?

2013
2016
2019
2050

How many different environmental issues are assessed under BREEAM 2011 New construction?

43
49
55
61

In the Green Guide to Specification (4th ed) which of the following commercial and industrial upper floor specifications has the highest rating?

Power floated in-situ reinforced concrete floor slab
Power floated post-tensioned in-situ reinforced concrete floor slab
Power floated in-situ reinforced concrete slab on ‘deep’ profiled metal decking
Power floated in-situ reinforced concrete slab on ‘shallow’ profiled metal decking

Of the nine environmental categories covered in BREEAM 2011, which requirements are generally the most challenging and most costly to a achieve BREEAM ‘Excellent’ or ‘Outstanding’ rating?

Materials
Land use and ecology
Energy
Pollution

What is the current cost per tonne for UK landfill tax for non-hazardous waste?

£8
£24
£32
£64

What are the estimated annual arisings from construction, demolition and excavation activities in the UK?

40 million tonnes
80 million tonnes
120 million tonnes
150 million tonnes

When assessing the environmental impact of buildings or construction products, what scope of assessment should be used to obtain the most accurate results?

Cradle to gate
Cradle to grave
Cradle to gate with options
It makes no difference

In England and Wales, which Approved Document is applicable to the operational energy/carbon performance new build, non-domestic buildings?

Approved Document L1A
Approved Document L1B
Approved Document L2A
Approved Document L2B

In buildings designed to take advantage of thermal mass, what is the optimum depth of concrete upper floor slabs?

50mm
90mm
150mm
200mm