View source for Structural fire engineering

__SECTIONLINKTOTOP__
Fire safety engineering can deliver value across the five areas of activity in the provision of fire precautions in buildings. These are:
<ol>
<li> Means of warning and escape</li>
<li> Internal fire spread</li>
<li> Structural response</li>
<li> External fire spread</li>
<li> Access and facilities for the fire service</li>
</ol>
<br>
This article concentrates on the third of these, structural response.  Of necessity, the information contained in these pages is not comprehensive. The reader’s attention is drawn in particular to guidance published by the Institution of Structural Engineers<ref name="No1"> Guide to the advanced fire safety engineering of structures. Institution of Structural Engineers, 2007</ref> for more detailed information. This document states that ''by adopting a performance based approach to structural fire engineering…more economic designs can be achieved and more innovative and complex buildings can be constructed.''  
{{#image_template:image=File:Emirates.png|caption=Emirates Stadium, London. Engineered for safety in fire.<br>''(Image courtesy of Andrew Dunn)''|align=right|wrap=true|width=500}}

==Introduction==
Guidance on the procedures for carrying out fire safety engineering analyses in buildings is contained in BS 7974<ref name="No2"> BS 7974: 2019. Application of fire safety engineering principles to the design of buildings. Code of practice. BSI</ref>. The introduction to this standard describes its purpose as being: ''to provide a framework for developing a rational methodology for the design of buildings using a fire safety engineering approach, based on the application of scientific and engineering principles to the protection of people, property and the environment from fire''. BS 7974<ref name="No2"></ref> is accompanied by a series of published documents (PD 7974, Parts 1 to 7))<ref name="PD 7974"> PD 7974 - Application of fire safety engineering principles to the design of buildings (Parts 1 to 7). BSI</ref> giving detailed guidance on the principles of fire engineering, fire development, spread of smoke, structural response, fire detection, fire service intervention, evacuation and risk assessment.

Fire safety engineering is applied across a wide range of building types. Typical of these is the design of sports stadia. Modern developments incur considerable investment and clients are seeking alternative means of attracting revenue on capital outlay. This means that some sports stadia can no longer be described as simple steel, concrete and blockwork structures for the sole purpose of watching sport. Instead they are mixed occupancy, often containing shops, restaurants and conference facilities. This can create difficulties in developing fire safety policies consistent with the objectives of the building regulations by the use of [[Structural_fire_resistance_requirements| Government published guidance]] alone. This is acknowledged in  [[Structural_fire_resistance_requirements#Approved_Document_B|Approved Document B]] <ref name="No3">[https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/937932/ADB_Vol2_Buildings_other_than_dwellings_2019_edition_inc_2020_amendments.pdf Approved Document B (Fire safety, Volume 2 – Buildings other than Dwellings), 2019 edition incorporating 2020 amendments – for use in England . Ministry of Housing, Communities & Local Government]</ref> which states that: ''Fire safety engineering might provide an alternative approach to fire safety. Fire safety engineering may be the only practical way to achieve a satisfactory standard of fire safety in some complex buildings and in buildings that contain different uses.'' 

In addition to sports stadia, typical structures commonly designed using modern fire safety engineering techniques include [[Multi-storey_office_buildings|offices]], [[Single_storey_industrial_buildings|industrial buildings]], airport terminals, [[Leisure_buildings|leisure centres]], [[Healthcare_buildings|hospitals]] and shopping centres. 

Fire safety engineering requires the co-operation of the entire design team if its full potential is to be realised and it is strongly advised that fire safety must be part of the remit of the team from the start of the design process. Structural engineers, fire engineers, architects, clients and representatives of the local authority need to communicate throughout the design process. The fire engineer must be given the opportunity to work closely with the architect and engineer to understand the features of the structure and to be able to communicate at the design stage the opportunities to facilitate a cost-effective solution to allow the development of advanced capability in fire.

==The stages of structural fire engineering==
If the response of a structure in a fire is to be calculated, it is first necessary to identify realistic fire scenarios for the assumed compartment of origin. Following this the time-temperature relationship in the fire must be established. Only then is it possible to predict the temperature and response of the structure.   

===Predicting the temperature of the compartment=== 
{{#image_template:image=File:Large_compartment_fire_test.png|caption=Large compartment fire test|align=right|wrap=true|width=300}}
The simplest way to predict the time-temperature relationship within a fire compartment is to assume a [[Fire_testing#The_standard_fire_test|standard fire]]. This has the advantages of being simple and well understood. 

An alternative method for predicting the heating rate and maximum temperature of the atmosphere inside the fire compartment involves assessing the fire load (the quantity and type of combustible material), the ventilation and the thermal characteristics of the compartment linings. These variables can be calculated or obtained from tabulated data. Once known, the temperature rise in the compartment with time can be determined. This is most commonly done in terms of a [[Structural_fire_engineering#Parametric_time-temperature_relationships| parametric time-temperature relationship]]  although zone modelling and computational fluid dynamics are also used. 

If the fire load, ventilation and thermal characteristics of the compartment linings are known, a [[Structural_fire_engineering#Time_equivalent| time equivalent]] can be calculated (the exposure to a standard fire that would have the same effect as the natural fire in the compartment under consideration).

===Predicting the temperature of the structure===
The temperature which the structure will reach in a fire will depends on the location, its size and any [[Fire_protecting_structural_steelwork|fire protection]] or shielding which may be in place. Where shielding and partial protection are not  factors, the temperatures attained by individual unprotected and [[Fire_protecting_structural_steelwork|protected]] structural steel members can be determined using temperature growth rates and heat transfer relationships given in the [[Design_using_structural_fire_standards#Fire_Eurocodes|fire Eurocodes]]: BS EN 1991-1-2<ref name="No4"> BS EN 1991-1-2: 2002, Eurocode 1. Actions on Structures. General actions. Actions on structures exposed to fire. BSI</ref> and BS EN 1993-1-2<ref name="No5"> BS EN 1993-1-2. 2005, Eurocode 3. Design of steel structures. General rules. Structural fire design. BSI</ref>. This is a complex calculation and is usually carried out using a spreadsheet approach, although it is also possible to use software based on finite difference or finite element analysis.

In [[Design_using_structural_fire_standards#BS 5950 Part 8|BS 5950 Part 8]]<ref name="No6"> BS 5950-8: 2003, Structural use of steelwork in buildings. Code of practice for fire resistant design. BSI</ref> the temperatures attained by unprotected individual [[Steel_construction_products#Standard_open_sections|beams and columns]] in a [[Fire_testing#The_standard_fire_test| standard fire test]] are also given in tabular format for fire ratings from 15 to 60 minutes. 

In addition, temperatures can also be calculated for individual elements of structure or for frame assemblies using bespoke models calibrated against actual test results.

===Predicting the response of the structure===
The response of the structure depends not only on the temperature it reaches in the fire but also on the applied loads and the effects of any [[Composite_construction#How_and_why_composite_construction_works|composite action]], restraint and continuity from the remainder of the structure. Once the response is known, [[Fire_protecting_structural_steelwork|fire protection]] requirements can be specified to meet the specific hazard. This design concept proves most cost effective when it can be demonstrated that the structure, or parts of the structure, has sufficient inherent fire resistance to avoid the need to apply [[Fire_protecting_structural_steelwork|fire protection]] .

===Parametric time-temperature relationships===
{{#image_template:image=File:Standard_and_parametric_fire_curves.png| align=left|wrap=true|width=400}}
Extensive research on fire growth and behaviour has led to the development of an approach for determining the parametric, or natural, time-temperature relationships which will develop within a compartment in the event of a fire. This has been consolidated in the [[Design_using_structural_fire_standards#Fire_Eurocodes|fire Eurocodes]], specifically Appendix A of BS EN 1991-1-2<ref name="No4"></ref>, which should be read in conjunction with the relevant National Annex<ref name="No7">NA to BS EN 1991-1-2: 2002, UK National Annex to Eurocode 1. Actions on Structures. General actions. Actions on structures exposed to fire. BSI</ref>. The use of parametric time-temperature relationships enables the engineer to eliminate some of the [[Fire_testing#Limitations_of_the_standard_fire_test|limitations of the standard fire test]]. Most importantly, it allows the engineer to take into account the fact that real fires have a growth and decay phase and are not adequately characterised by the infinite temperature rise of the [[Fire_testing# The_standard_fire_test|standard fire test]].

==Time equivalent==
{{#image_template:image=File:Eurocentral.png|caption=Maxim Office Park, Eurocentral, outside Glasgow.<br>''(Image courtesy of JGA Fire Engineering Consultants)''|align=right|wrap=true|width=200}}
Time equivalent allows the engineer to calculate the severity of a fire in a compartment in terms of the  [[Fire_testing#The_standard_fire_test|standard fire]] time-temperature relationship. For example, should the engineer calculate that the time equivalent of a fire in a compartment was 45 minutes, this means that a fire in that compartment would be equivalent in severity to exposure to the [[Fire_testing#The_standard_fire_test|standard fire test]]  for that period of time.  
A number of formulae exist for the calculation of time equivalent, the most widely used of which is to be found in Appendix B of PD 6688-1-2<ref name="No8"> PD 6688-1-2: 2007, Background paper to the UK National Annex to BS EN 1991-1-2. BSI</ref>. As with the calculation of [[Structural_fire_engineering#Parametric_time-temperature_relationships|parametric time-temperature relationships]], this links the fire severity to the key compartment parameters of ventilation, fire load density and wall characteristics. 
Time equivalent may be used to demonstrate that the tabulated fire resistance periods required in many large buildings (as given in [[Structural_fire_resistance_requirements#Approved_Document_B|Approved Document B]]<ref name="No3"></ref>, [[Structural_fire_resistance_requirements#Technical_Handbook_2022|Scottish Technical Handbook 2022]]<ref name="No9">[https://www.gov.scot/publications/building-standards-2022-technical-handbook-non-domestic/ Building standards technical handbook: 2022 – Non-domestic, Section 2 – Fire, The Scottish Government]</ref> in Scotland and [[Structural_fire_resistance_requirements#Technical_Booklet_E|Technical Booklet E]]<ref name="No10">[https://www.finance-ni.gov.uk/sites/default/files/publications/dfp/Technical-booklet-E-Fire-Safety-October-2012_0.pdf Technical Booklet E, Fire safety, Building Regulations (Northern Ireland) 2012, Department of Finance and Personnel of the Northern Ireland Government, 2012]</ref> in Northern Ireland) are overly conservative and can be reduced.

The photograph shows Maxim Office Park, Eurocentral, outside Glasgow. This project incorporated 10 buildings, each designed as a single compartment of more than 4000m&sup2;, requiring 120 minutes fire resistance according to [[Structural_fire_resistance_requirements#Technical_Handbook_2022|Scottish Technical Handbook 2022]]<ref name="No9"></ref>. An analysis taking into account ventilation conditions, fire load and surface linings showed that a real fire would be as severe as exposure to the [[Fire_testing#The_standard_fire_test|standard fire test]] for between 26 and 28 minutes. A sensitivity analysis was carried out taking into account variations in the key parameters. Following this analysis, [[Structural_fire_resistance_requirements#Technical_Handbook_2|fire resistance periods]] of 60 minutes in nine buildings and 90 minutes in one building were adopted.
More information is available in the [[Structural_fire_engineering#Case_studies|case study]] at the bottom of this page.

==Cardington fire tests==
{{#image_template:image=File:Cardington_office_fire_test_before.png|caption=The Cardington frame before an office fire test|align=right|wrap=true|width=300}}
{{#image_template:image=File:Cardington_ fire_test_afterward.png|caption=The Cardington frame after the office fire test|align=right|wrap=true|width=300}}
Modern structural fire engineering in steel framed buildings owes much to a series of seven fire tests which were carried out on an eight storey steel framed building with [[Composite_construction#Composite_slabs|composite steel deck floors]] at the Building Research Establishment (BRE) facility at Cardington in Bedfordshire between 1994 and 2003.
The test programme was divided into two parts; the first, comprising a single beam test and three large compartment tests was funded partly by British Steel and partly by the [https://ec.europa.eu/info/research-and-innovation/funding/funding-opportunities/funding-programmes-and-open-calls/research-fund-coal-and-steel-rfcs_en Research Fund for Coal & Steel] (then the European Coal and Steel Community). A complementary program, comprising three compartment tests was carried out by the Building Research Establishment.

The tests were carried out to determine if the fire performance of real buildings with [[Composite_construction#Composite_slabs|composite steel deck floors]] was better than is suggested by tests on individual elements of construction. Evidence that this was the case had been provided by fires in real building (including at the Broadgate development in London: see [[#Resources|SCI P113]]), tests carried out in Australia and also small scale fire tests and computer modelling of structural behaviour. In all these cases, [[Composite_construction#Composite_slabs|composite steel deck floors]] had demonstrated robustness and resistance to fire far greater than was indicated by [[Fire_testing#The_standard_fire_test|standard fire tests]] on single beams or slabs.

In order to obtain a direct comparison with the [[Fire_testing#The_standard_fire_test|standard fire tests]], the first test was carried out on a single unprotected beam and surrounding area of slab. The steel temperatures and beam defections measured in the test indicated that a failure deflection would have occurred at a temperature over 1000&deg;C, far greater than the temperature of 700&deg;C at which it would have failed if tested in isolation.

Further tests were carried out in compartments varying in size from 50m&sup2; to 340m&sup2; with fire loadings provided by gas, wooden cribs and standard office furniture. Columns were [[Fire_protecting_structural_steelwork|protected]] but beams were not. Despite atmosphere temperatures of over 1200&deg;C and temperatures on the unprotected steel beams of 1100&deg;C in the worst case, no structural collapse took place.<br>

The full set of data from the four British Steel tests and the three BRE tests is available by following the link [[Steel_fire_test_data#Cardington_fire_tests|here]].

==The fire test results explained==
{{#image_template:image=File:BRE_Digest_462.png|caption=BRE Digest 462<ref name="No11"> BRE Digest 462. Steel Structures supporting composite floor slabs: design for fire. Building Research Establishment</ref>|align=right|wrap=true|width=150}}
Observations from the [[Structural_fire_engineering#Cardington_fire_tests| Cardington fire tests]] and other large building fires have shown that the behaviour of the [[Composite_construction#Composite_slabs|composite steel deck floor]] plays a crucial role in providing enhanced fire resistance when compared to that achieved by tests on single isolated elements of construction. The [[Structural_fire_engineering#Cardington_fire_tests|fire tests]] demonstrated that, even where significant numbers of beams are not protected, the slab acts as a membrane supported by cooler perimeter beams and protected columns. As the unprotected beams lose their load carrying capacity, the composite slab utilises its full bending capacity in spanning between the adjacent cooler members. With increasing displacement, the slab acts as a tensile member carrying the loads in the reinforcement which then become the critical element of the floor construction. Using the conservative assumption of simply supported edges, the supports will not anchor these tensile forces and a compressive ring will form around the edges of the slab. Failure will only occur at large displacements with the fracture of the reinforcement. This is described in more detail in the Building Research Establishment Digest 462<ref name="No11"> BRE Digest 462. Steel Structures supporting composite floor slabs: design for fire. Building Research Establishment</ref>.

==Simplified structural fire engineering==
The simplest form of structural fire engineering is the use of [[Structural_fire_engineering#The_use_of_design_codes|codes]] to design individual elements of construction. Techniques for structural fire engineering on assemblies of elements of construction using a simplified method have also been developed which require little specialised knowledge on the part of the structural engineer. These can be utilised in the design of [[Structural_fire_engineering#Design_software|simplified sub-assembly models]] and make use of the understanding of the behaviour of [[Composite_construction|composite construction]] in fire gained from the [[Structural_fire_engineering#Cardington_fire_tests|Cardington fire tests]].

===The use of design codes===
Two codes for the design of structural steel in fire are in use in the UK. These are [[Design_using_structural_fire_standards#BS 5950 Part 8|BS 5950 Part 8]]<ref name="No6"></ref>  and the [[Design_using_structural_fire_standards# Fire_Eurocodes|fire Eurocodes]] suite: BS EN 1991-1-2<ref name="No4"></ref>, BS EN 1993-1-2<ref name="No5"></ref> and BS EN 1994-1-2<ref name="No12"> BS EN 1994-1-2: 2005+A1:2014, Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design. BSI</ref>. These codes concern themselves mainly with the design of individual elements of construction in fire. The behaviour of large frames and assemblies in fire is usually dealt with using [[Structural_fire_engineering#Advanced_structural_fire_engineering| advanced fire engineering]] methods. Although the two codes are quite different in scope and complexity, they are based on a common understanding of the strength of structural steel in fire and also the factors which affect inherent fire resistance.

===Design software===
{{#image_template:image=File:Unprotected_secondaries_Project_Time.png|caption=Unprotected secondary beams|align=right|wrap=true|width=300}}
The analysis software ''Vulcan'' is a three dimensional finite element analysis program originally developed at the University of Sheffield. The software considers whole structure action and includes geometrical and material non-linearity within its beam-column and slab elements, with full membrane action in the slabs. The software provides comprehensive output options of deflection vs. time curves, member forces, and slab forces. Semi-rigid connections may be incorporated within the model. More information on ''Vulcan'' is available from [http://www.vulcan-solutions.com Vulcan Solutions].

Free [https://sections.arcelormittal.com/design_aid/design_software/EN fire calculation software] is also available. MACS+ designs composite floor slabs at elevated temperatures by taking into account the enhancing effects of the membrane action in slab. Previously called FRACOF, it also checks perimeter beams and provides a critical temperature for each of them.

==Advanced structural fire engineering==
In advanced structural fire engineering the behaviour of buildings is modelled using bespoke or commercially available software. Detailed advice on the process is provided by the Institution of Structural Engineers<ref name="No1"> Guide to the advanced fire safety engineering of structures. Institution of Structural Engineers, 2007</ref>. The methodologies are based on the results of the [[Structural_fire_engineering#Cardington_fire_tests|Cardington fire tests]] and the methods are used most frequently to demonstrate that it is possible to leave large numbers of beams unprotected in steel framed, [[Composite_construction#Composite_slabs|composite steel deck construction]].
A case study on Heron Tower in London is available by following the link [[Structural_fire_engineering#Case_studies|here]].
<gallery caption="" widths=200px heights=200px> 
Image:Unprotected_steel_Plantation_Place.png|Unprotected steel beams at Plantation Place South, London.<br> ''(Image courtesy of Arup Fire)''
Image:Floor_plate_The_Shard.png|The floor plate at the Shard, London. Beams outlined in red are protected; the remainder are unprotected.<br> ''(Image courtesy of WSP Fire)''</gallery>

==Case studies==
<gallery widths=180px heights=210px> 
Image:Dypatil_school_of_management.png|[[External_steel_at_the_D_Y_Patil_School_of_Management|External steel at the D. Y. Patil School of Management]]
Image:Eurocentral.png|[[Maxim_office_park_Glasgow|Maxim Office Park, Glasgow]]
Image:Heron_Tower_2.png|[[Heron_Tower,_London|Heron Tower, London]]
Image:The_Shard.png|[[The_Shard,_London|The Shard, London]]
</gallery>

==References==
<references responsive="0"/>

==Resources==
*[[Media:SCI_P113.pdf|SCI P113 Structural fire engineering: Investigation of Broadgate Phase 8 fire]]
*[[Media:Steel_construction_-_Fire_Protection.pdf|Steel construction - Fire Protection supplement, 2013]]

==See also==

*[[Design_using_structural_fire_standards|Design using structural fire standards]]
*[[Fire_protecting_structural_steelwork|Fire protecting structural steelwork]]
*[[Fire_testing|Fire testing]] 
*[[Sprinklers_in_UK_fire_codes|Sprinklers in UK fire codes]]
*[[Structural_fire_resistance_requirements|Structural fire resistance requirements]]

==External links==
*[https://ec.europa.eu/info/research-and-innovation/funding/funding-opportunities/funding-programmes-and-open-calls/research-fund-coal-and-steel-rfcs_en Research Fund for Coal & Steel]

== CPD ==
*[[Continuing Professional Development#Design for fire|Design for fire]]
*[[Continuing_Professional_Development#Fire_Engineering_Seminars_2013|Fire engineering seminars 2013]]

[[Category:Fire and steel construction]]
[[Category:Index of main articles]]