View source for Ardross Distillery, Alness

==Article in [https://www.newsteelconstruction.com/wp/wp-content/uploads/digi/NSC0618digi/pubData/source/NSC_June18_Hyperlinks_19June.pdf#page=10 NSC June 2018]==
{{#image_template:image=File:Ardross_Distillery-1.jpg‎|align=right|wrap=true|caption=Copper tanks are lowered into position through holes in the steelwork|width=400}}
'''Steel blend for distillery'''<br>
Steel [[Construction|construction]] is playing a leading role in the building of a new distillery in The Highlands.

Set in the picturesque Averon Valley, some 30 miles north of Inverness, a new distillery is being built within the grounds of the abandoned and rundown 19th Century Ardross Mains farmstead.

The project’s client, Ardross Investments, purchased the site, which consists of 50 acres of private land with its own loch, in order to build a modern, state-of-the-art distillery that will produce a number of different spirits. To this end a [[Braced_frames|steel-framed]] design that incorporates some retained and salvaged elements from the original buildings has been adopted as the most efficient [[Construction|construction]] method.

The main distillery building, containing the main entrance, still house, tun room, mash house and mill room, will be an L-shaped structure that partially surrounds an inner courtyard. The majority of this main building is a [[Braced_frames|steel-framed]] structure, albeit with two original stone walls incorporated into the [[Design|design]] and the area housing the main entrance and lobby which is timber- framed. The walls at the rear of the main building have been removed and rebuilt with a steel frame to increase the size of the new two-storey facility.
{{#image_template:image=File:Ardross_Distillery-2.jpg‎|align=left|wrap=true|caption=The distillery sits within a large rundown farmstead|width=300}}
Main contractor Morrison Construction started on site late last year, inheriting a plot that had already been partially cleared with only building shells and stone walls left. Adding to the overall aesthetics of the scheme and helping to preserve the character of the project, stone and slate from the farm’s collapsed buildings will be reused to roof some of the distillery structures. “As well as retaining and reusing as much of the on-site materials as possible, the building’s steelwork, which has all been [[Metallic_coatings#Hot-dip_galvanizing|galvanized]] against [[Corrosion_of_structural_steel|corrosion]], will be left exposed within the completed structure, adding to the high-spec interior requested by the client,” says Morrison Construction Contract Manager Gordon Williamson.

Steelwork contractor for the project is locally-based Mackay Steelwork & Cladding and it has [[Construction#Steel erection|erected]] 200t of structural steel for the main building and an adjacent boiler house. Also within the company’s remit is the supply and installation of metalwork, predominantly consisting of grating to form the distillery’s first floor, as well as stairs, hand railings, composite roof and wall [[Building_envelopes|cladding]].

A [[Braced_frames|steel-framed]] solution was chosen for its ease and [[Single_storey_industrial_buildings#Speed of construction|speed of construction]], as well as its ability to provide the column-free areas for the main building’s two floors. The steel columns are also carrying a considerable weight as the [[Building_envelopes|cladding]] will be topped with slate, and so the members are slightly larger sections than would ordinarily be used on a structure of this size.
{{#image_template:image=File:Ardross_Distillery-3.jpg‎|align=right|wrap=true|caption=Model showing the main steel elements|width=300}}
Forming the roof of the [[Braced_frames|steel-framed]] part of the distillery building are a dozen 10.5m-long × 3m-deep [[Trusses|trusses]], which were [[Fabrication#Handling and transportation|brought to site]] as complete fully-welded sections in order to avoid unnecessary on-site work. “The [[Braced_frames#Horizontal bracing|roof bracings]] and roof purlins are a bespoke system, in that the [[Steel_construction_products#Structural hollow sections|CHS]] bracings and hot rolled [[Steel_construction_products#Standard open sections|PFC]] roof purlins are all within the depth of the primary steel rafters, which results in the bracings stopping and starting either side of the purlins,” explains Mackay Steelwork & Cladding Director Neil Mackay.

Using one 80t-capacity [[Construction#Mobile cranes|mobile crane]] for the steelwork, and a 55t-capacity crane for the [[Building_envelopes|cladding]], Mackay completed the majority of its programme in six weeks. “The biggest challenge has been trying to co-ordinate all of our activities in a tight site, where most of the time we could only operate one [[Construction#Mobile cranes|mobile crane]],” adds Mr Mackay. “At the same time, areas of roof steel and [[Building_envelopes|cladding]] had to be left out to allow installation of distilling stills and tanks. This happened during our [[Construction|construction]] phase and these areas of roof steel and [[Building_envelopes|cladding]] were then installed retrospectively.”

As well as the main distillery building, Mackay has also [[Construction#Steel erection|erected]] a pipe bridge that connects water tanks (known as the tank farm) with the distilling process within the mash house area, and a small [[Braced_frames|steel-framed]] boiler house to the rear of the site.

Other buildings on the site are being renovated to form ancillary structures for the distillery. Two detached stone one-and-a-half storey cottages to each side of the main building will become offices and staff accommodation. An old dairy building behind the staff quarters will become a blending and product development laboratory, while a three-storey house will be converted into a vaulted cask storage area.
{{#image_template:image=File:Ardross_Distillery-4.jpg‎|align=left|wrap=true|caption=New steel elements are connected to retained stone walls|width=300}}
The Ardross Distillery is expected to produce its first spirits by the end of the year.

Summing up, the Highland Council says that through the use of appropriate materials, with new sections of the building being sensitively sited and designed when viewed alongside the existing buildings, the project will safeguard the long-term future of the dilapidated historic buildings. In a report it concluded: “It is encouraging to see the future of the listed buildings protected and secured through a high-quality [[Design|design]], which respects the setting of the steading and the nearby Category A listed Ardross Castle.”

{|class="wikitable" width="400"
|-
|'''Architect'''||NORR
|-
|'''Structural Engineer'''||Blythe & Blythe
|-
|'''Steelwork Contractor'''||Mackay Steelwork & Cladding
|-
|'''Main Contractor'''||Morrison Construction
|-
|'''Main Client'''||Ardross Investments
|}

[[Category:Case studies - Single storey industrial buildings]]